Replace Nissan Key Fob Batteries
If your Nissan keyfob doesn't respond to your commands, its battery may be dead. This is a simple fix that the majority of people can complete themselves.
You can buy a replacement from a hardware store or your owner's guide for the specific model you have and you'll need to follow these steps to replace the battery.
Change the battery
The key fob on your Nissan model is equipped with a built-in lithium battery which will eventually lose charge. Fortunately, replacing the key fob battery is a straightforward process which takes just less than a few minutes. The first step is to purchase the replacement CR2032 3V battery. It's a tiny coin cell battery often used in key fobs, and can be found in a variety of convenience stores. You'll also require a pair of gloves (latex or non-latex) and a small flathead screwdriver to open the fob. Check the owner's manual for a detailed guideline and steps before starting.
When you have the new battery, remove the old one by turning the fob upside down and looking at the back side. You will see a small catch that you must release by pulling it down. This will release the mechanical key from its original position inside the fob.
Then, insert the brand new battery, and make sure that it is oriented correctly. Close the fob when the battery is installed and then press the two sides of the fob together. After you have completed this step verify your key fob by pressing the unlock button and observing what happens. If everything is in working and in good working order, you're ready to enjoy the Nissan's features. After replacing the battery, it is a good idea to re-program your key fob to ensure that it's functioning properly.
Replace the Transmitter
With your key fob functioning as the "key" to a myriad of your car's most crucial functions, it can be a serious blow in the event that you lose or damage it. A damaged or dead key fob could prevent you from locking or starting your vehicle.
So, it's a good idea to have an extra key fob in your possession in case of an emergency. The procedure for replacing your Nissan keyfob is fairly simple. The process of replacing the Nissan key fob is simple. You'll require an entirely new flathead screwdriver and a new battery to remove the old.
You'll also require an Panasonic CR2032 3V round battery (you can find them in multipacks priced less than $5 USD). The battery is located in the back half of the key fob. You'll need a small flathead screwdriver to gently split the two halves. Utilize a small screwdriver to pull the clip on top of the battery to take it off, taking note of its location. Replace the battery and then assemble the key fob. Make sure to test it to verify it works.
Nissan Intelligent Keys eventually wear out and need to be changed just like any other electronic device. To avoid this is a good idea to protect your key fob from magnetic fields, water and physical impact, so be sure not to drop it or put too much pressure on it.
Replace the Key
If your Nissan key fob dies, you cannot use it to unlock your vehicle or start it. This is a problem for those who must go to work in Detroit or run errands around Dearborn.
The good news is, the battery in your Nissan smart key isn't difficult to replace. You can replace the battery at home or at the dealership. The average cost for a pack is $5 or less.
Start by flipping the fob over and pressing a small catch on the back. This will release the emergency mechanical key inside. The emergency key won't allow you to start your car but it will unlock the door.
Find a small slit on the top of the casing. You can use a screwdriver or a plier to break apart the two pieces of the key fob. Once you've access to the battery inside, take it out and take note of its position. When you are ready to assemble your key fobs, insert the new battery and snap the two parts of the case back together. Insert the mechanical key and your Nissan smartkey will work as usual.
Other Problems
Many modern cars are equipped with key fobs that let you to lock and unlock them without the need for a physical car key. To accomplish this the key fob makes use of a small transmitter to communicate with the car's computer system.
There are a few possible reasons why your Nissan key fob does not work after you replace the battery. One possibility is that the new battery was not correctly seated into the key fob. A reset of the key fob is a different possibility. Luckily, this is an easy procedure that can be accomplished at home with just a few tools.
For example, you'll need the screwdriver, which should be preferably with a flat head, to open the key fob to remove the battery that was in there. After that, you can use a screwdriver to open the back of the key fob and insert the new battery. You'll also need to reprogramme your key fob in order for it to work with your vehicle.
Fortunately, nissan key replacement cost uk can be programmed and you can do it yourself. This is usually done by inserting the fob into the ignition two times within five seconds. If this doesn't work, you can take your key fob in to a dealer or an auto locksmith to have it programmed. The cost will differ based on the person who you contact and the type of vehicle you own.